What Is a Structured Cabling System?

A structured cabling system is a cabling system installed in accordance with international standards. In Taiwan, the main reference standard is ANSI/TIA/EIA-568B(568C), supplemented by others such as TIA-569-B, TIA-598-C, TIA/EIA-606-A, J-STD-607-A and TIA-758-A.
"Installation based on standards" and "testing against standards" are the guiding principles of structured cabling.

A cable analyzer tests whether each Channel passes

Benefits of Structured Cabling Systems:

  • Scalability and compatibility: A single installation covers all wiring needs for telephone, video, audio, control, fax, POE, WIFI, security and access control. It can be changed, expanded and repurposed for flexible use, with no need to re-cable every time requirements change.
  • Reduced cable volume: Integrated cabling reduces overall cable bulk, so shafts and cable trays are no longer crammed with assorted lines, and cables no longer become congested or tangled. Clear labeling and color coding prevent existing cables from being removed by mistake, making maintenance far easier.
  • Reliability: Cabling is cabling and networking is networking. Cables that pass standard testing guarantee network reliability, so when network problems arise, there is no need to suspect the cabling. Barring physical damage, the reliability of the cabling system is beyond doubt.

Common Misconceptions

  • Q: Is a cabling system just running network cables?
    A: Cabling and networking are separate concepts. A cabling system carries more than network traffic: it can also carry video, audio, telephone, fax, and even automation control signals and power. A compliant cabling system must be able to carry most wired signals.
  • Q: Is it enough for the installer to provide a Fluke test report?
    A: Acceptance is not just about the test report. Is the cable analyzer calibrated regularly? Did the owner spot-check after installation? Most importantly, was the owner present during testing to check each result as it was completed? These are just as important as the test report. 
  • Q: Is structured cabling just network cables that are neatly dressed?
    A: The standards do not define what neat cable dressing looks like. Clear, accurate color coding and labeling matter more than neatness: proper color coding supports future O&M, and clear, accurate labels make troubleshooting easier. Neat cabling is simply the natural result once these management practices are in place.
  • Q: Is structured cabling expensive?
    A: “Buying a car that meets safety regulations” is not the same as “buying an expensive car.” By the same logic, a structured cabling system built to installation standards is not necessarily an expensive one. Cost comes from materials and labor, and lower-priced products and labor can still achieve a structured cabling system.
  • Q: Why shouldn't you crimp your own RJ45 connectors anymore?
    A: A cabling system uses a Permanent Link with information outlets at both ends. As the name suggests, it is the part that never changes once installed. What can change is the Patch Cord, which lets you adjust to the length you need. In addition, hand crimping tools cannot guarantee that every crimp will pass cable analyzer testing. We recommend factory-made Patch Cords supplied with test reports to ensure the cable quality of the entire link stays within the standard.

Click to Enlarge